Owner Resources

Plumbing Company Insurance Renewing Soon? Who to Get Quotes From and When to Start

Ask your current agent to quote the renewal, add at least one independent agency that can reach several carriers, and begin well before the renewal date. The quotes are the easy part. What decides how good they are is how complete your records are when the submission goes out, so gathering comes first.

Renewal lands on your calendar
Name the people who will help and request loss runs.
Gather the documents
Payroll by class, vehicles and drivers, equipment, subcontractor certificates, contract requirements, changes in the work.
Send one complete submission
The same package to every agency you ask.
Compare written terms
Forms, limits, exclusions and endorsements side by side.
Decide and bind
Leave time for corrections before the renewal date.
A staircase of five steps runs from the day renewal lands on your calendar down to the renewal date: request loss runs, gather the documents, send one complete submission, compare written terms, then decide and bind. The gather-the-documents step is highlighted because every later step depends on it. No figures are shown.

Who should be asked to quote a plumbing company renewal?

Ask your current agent first, because that agent knows the account and can tell you what changed in the market for your kind of work. Then add at least one independent agency that places contractors and can approach several carriers with the same submission.

Your current agent holds the account history, the endorsements added over the years and the certificate requests you have handled. Ask for the renewal terms in writing, and ask what the agent would change if the decision were its own.

The second voice matters because one agent gives you one view. An independent agency can show how several carriers treat the same plumbing company, which is useful even if you stay put. Ask it which carriers it would approach for a company like yours and how the forms would differ. For choosing that agency, see what makes an agency a plumbing specialist.

Resist asking everyone you can find. A pile of half-informed quotes is harder to compare than two good ones.

When should the renewal work begin?

It should begin as soon as the renewal is on your calendar, and that means weeks before the date, not days. Early starts leave room to fix what turns up.

Read the timeline as a sequence, from earliest to the day itself:

  • As soon as renewal is on your calendar: decide who is helping you, tell your current agent that you are shopping the renewal, and request loss runs from each carrier that has insured you.
  • Well before the date: gather the working documents covered below, and write down every change in how the company operates.
  • Weeks before the date: send the same complete package to each agency, and answer their questions the same day you can.
  • As proposals arrive: compare the written terms side by side, and ask about every difference.
  • With time to spare: choose, sign what needs signing, and confirm the new certificates and any contract-required endorsements are issued.
  • Renewal day: confirm in writing that coverage is in force without a gap.

What you control is how early your own work is finished. If a carrier asks a question you did not expect, you want it to arrive while there is still time to answer it carefully.

Which records should you gather first?

Gather the loss runs and the payroll breakdown first, because the loss runs come from other people and the payroll is the figure most worth getting right.

Loss runs are the claims history your carriers can produce. Request them early since they come from someone else, and read them yourself. Look for claims still shown open that should be closed and entries you do not recognize. Correcting an error before a submission goes out is easier than explaining it afterward. For each claim, write a short note on what happened and what changed afterward; the post on reducing claims in a plumbing business gives you a place to start.

Payroll by class means payroll broken out by the kind of work each person does: field plumbing, clerical, management, any outside sales. This drives workers compensation, and a lumped total tends to produce a rough answer. Separate owners from employees and field staff from the office. Ask your agent how payroll estimates are reconciled against actual payroll, and what to do when headcount changes mid-year.

Put these documents in one folder and send the same folder to every agency. A consistent package is what makes the quotes comparable. If a shop, stock or office is part of the renewal, how to compare commercial property insurance quotes covers that line.

What do the vehicle, equipment and subcontractor records add?

Each one feeds a different policy, so each one prevents a different surprise.

For commercial auto, prepare a vehicle list and a driver list. For each vehicle, note how it is used and who drives it, and note whether any employees use their own vehicles for company business. Agents ask exactly those questions, so having the answers written down saves a round of back and forth. Triple-I explains why those questions get asked in its article on whether a business needs a commercial auto policy.

For contractors equipment, prepare an equipment list covering the tools, machines and gear you carry on jobs and keep in vans or a shop. Include anything leased or rented. The tools in a van are not covered by the auto policy, which is a distinction worth confirming on your own forms.

For general liability, gather your subcontractor certificates. If you subcontract part of the work, the agent needs to know who, what they do, and whether they carry their own coverage. Missing certificates leave a hole that tends to land on you. Also gather a list of your contract insurance requirements: the clauses in your agreements with general contractors, property managers and other customers that specify limits, additional insured status or other endorsements. See what general contractors require from plumbing subs, and show the agent your actual contracts rather than describing them from memory.

Which changes in the work should you put on the table?

Tell every agency about each change in what the company does, because coverage follows the work described, and a new line of work that is missing from the description is a gap waiting to be found.

Think back over the policy year. Did you add gas work, start more commercial jobs, enter a new city or state, buy more vans, take on a larger general contractor, or begin subcontracting work you used to do yourself? Did you stop doing something? Each change alters what the carrier is asked to cover, and some change which carriers want the account.

The temptation is to leave a change off because it might complicate the quote. That is the wrong instinct. Work disclosed at renewal can be fitted into the program or sent to a different market; work discovered at claim time invites a dispute.

Real-World Scenario: Picture a plumbing company that does residential service and some small commercial tenant work. During the year, the owner adds a second service van, hires two more technicians and starts subcontracting drain cleaning to a local operator. At renewal time the owner pulls the loss runs early, finds one old claim still showing open, gets it corrected, and writes down the three changes. The package goes to the current agent and to an independent agency in the same week. Both agencies ask almost the same follow-up questions, because they received the same facts, and the proposals can be read against each other.

How do you compare quotes without just looking at a total?

Compare the written terms line by line, in one document you build yourself, before you let any total influence you. A summary page shows what the agency chose to emphasize; the forms show what the policy does.

Build a simple side-by-side sheet with one column for the expiring policy and one for each proposal. Down the left side list each line of coverage: general liability, workers compensation, commercial auto, contractors equipment, umbrella if you carry it. Under each line write down:

  • the limits that apply and how they are structured;
  • the deductible or retention you would carry;
  • the exclusions the proposal lists or attaches;
  • the endorsements attached, including any additional insured wording your contracts need;
  • anything the proposal says is subject to conditions, such as an inspection, an audit or a signed warranty.

Then read the exclusions and endorsements in the actual forms, not only the proposal cover page. The post on the your-work exclusion explains one that plumbers should understand before they sign anything, and the post on additional insured status covers another that contracts commonly require. If a proposal leaves out something your expiring policy had, mark it. A difference in what is covered often matters more than a difference in the bottom line, and it is the one most likely to be invisible on the summary.

Where you do not understand a term, ask the agent to explain it in plain words and point to the form. NAIC also publishes a small business insurance page if you want neutral background. For an overview of how the lines fit together, the coverage page lays it out for plumbing companies.

What should you not do while renewal is underway?

Do not let the policy lapse, do not decide from a summary page alone, and do not change agents and carriers in the last days before expiration.

A lapse is the serious mistake. Work that happens during a gap may be uninsured, and contracts and certificates often assume continuous coverage. Confirm with your agent and your contracts what must stay continuous, and ask for written evidence that the new policy begins when the old one ends.

Deciding from a summary page alone is the quiet mistake. Two proposals can look alike on the first page and differ on exclusions, conditions or endorsements in the forms behind it. Read the forms.

Switching in the final days is the rushed mistake. A new agency has little time to learn your business, and an error in the submission has no room to be corrected. If you are close to the date with nothing decided, tell your current agent plainly and ask what can keep coverage continuous while you finish.

If you want a second opinion on your records or proposals, you can request a quote from Plumbing Guard Insurance, an independent specialty agency run by Nate Jones, CPCU. You can read more about the agency before you decide.

The bottom line

Ask your current agent and at least one independent agency with several markets to quote, and begin as soon as the renewal is on your calendar. Gather the documents first, then compare the quotes on written terms rather than a summary page.

Frequently asked questions

Should I ask my current agent to quote the renewal?

Yes. Your current agent knows your account and can often explain what changed since last year. Ask for the renewal terms in writing, and ask what the agent would change if it were your decision. Then compare that against at least one independent agency that can approach several carriers, so you see more than one view of your own business.

Why add an independent agency instead of just shopping online?

An independent agency can approach several carriers for one submission and explain how each proposal differs in form, limits and conditions. A bare online quote often leaves out the questions about your actual work. Whichever route you take, make sure the proposal states the coverages and conditions in writing, not only a total.

What is the first thing to request when renewal is coming?

Request your loss runs, the claims history reports from your carriers, because they come from someone else and can take time to arrive. Ask for them as soon as renewal is on your calendar, and read them yourself for errors, open items or claims that should show as closed before any agent sees them.

What changes in my work should I tell the agent about?

Tell the agent about anything new: gas work, commercial jobs, new service areas, added vehicles or crew, more subcontracted work, or contracts with new insurance requirements. Coverage is built around the work described on the application, so a change you leave out can surface later as a coverage dispute when you can least afford one.

How do I compare two proposals fairly?

Lay the proposals side by side and compare coverage terms, limits, deductibles or retentions, listed exclusions, and attached endorsements line by line, using the written forms rather than a summary page. A difference in what is covered matters as much as a difference in the bottom line, so list those differences before you look at anything else.

Is it risky to wait until the last week to switch?

It can be. A short window leaves little time to fix an error, answer an underwriting question, or notice an exclusion you did not expect. A lapse in coverage can also put jobs, contracts and license standing at risk, so confirm with your agent and your contracts what must stay continuous. Starting earlier removes most of that pressure.

About the author

Nate Jones, CPCU

Nate Jones, CPCU, is the founder of Wexford Insurance and Plumbing Guard Insurance, a specialty insurance agency placing plumbing contractor coverage in 48 states across a 25-carrier specialty panel. He works with plumbing contractors at renewal by gathering the same set of records every year and putting the expiring policy and each proposal side by side before anyone decides. Connect via the Plumbing Guard Insurance quote form or call 317-942-0549.

Insure your plumbing operation with a CPCU-led agency

Tell us how you work — residential service and remodel, or commercial systems and new construction — and we will market it to carriers that write the plumbing class.