Cost Guides

Plumbing Insurance Cost With 15 Employees: What Drives It

A plumbing business with 15 employees can expect to pay roughly $10,000 to $25,000 or more a year for insurance, based on what we see placing plumbing programs. That is our estimate, not a quote. What moves a company within that range, or above it, is payroll and how it is classified, the vehicles and drivers on the road, the kind of plumbing work the crew does, the states involved, the limits you carry and your claims record. Knowing those drivers shows you where the cost comes from and which parts you can influence.

Why is that a range and not a single number?

Because two companies with 15 employees can be very different risks. One might be a residential service shop with technicians in vans and an office team. Another might be a commercial contractor running excavation and new construction across several states. Their headcounts match; their exposures do not.

Carriers price the exposure, not the headcount. The low end of the range fits a lighter mix of work with a clean record; heavier work, more vehicles, more states and past claims push a company toward the top or past it. A quote you can rely on still requires your records. The post on plumbing contractor insurance cost explains the general case; this post looks at what changes once a company reaches a crew of this size.

What a 15-employee company does have is history: payroll records, a vehicle list, a few years of claims. That history makes the drivers below measurable, which is exactly what an underwriter will do.

How does payroll drive the cost?

Payroll is the base that workers compensation is commonly priced against, and it often feeds general liability as well. More employees mean more payroll, so the cost tends to grow as you hire.

How the payroll is classified matters as much as the total. Field plumbers, office staff, outside sales and owners are generally treated differently. If office payroll is reported together with field payroll, all of it may be treated as field work. Keep payroll broken out by what each person actually does.

Owners deserve their own line. Depending on the state and the business structure, owners may be included or excluded from workers comp, and the choice affects both cost and protection. Ask your agent how your state treats owners, and confirm with your state workers compensation agency, which you can find in the Department of Labor directory of state workers’ compensation officials.

The post on what drives plumbing workers comp costs explains classification and the experience modification in more depth.

Payroll and how it is classified
Field, office, sales and owners, reported separately.
Vehicles and drivers
Every van, truck and driver record.
Type of work
Service, remodel, new construction, excavation, gas.
States worked in
Comp and auto rules differ by state.
Claims record
Frequency, severity and what changed afterward.
Limits and structure
Contract demands, umbrella, deductibles.
Your insurance program’s cost
The diagram stacks the cost drivers for a plumbing business with a crew of this size above a single bar labeled as the program’s cost. Payroll and classification sit on top and are highlighted because they move workers comp most directly. Vehicles and drivers, type of work, states worked in, claims record, and limits and structure sit beneath it. No figures are shown.

How do vehicles and drivers drive the cost?

A crew of 15 usually means a fleet. Each vehicle on the commercial auto policy is priced on its type, its use and where it is garaged, and each driver’s record is reviewed. A single driver with a poor record can affect the whole policy.

Keep a current vehicle list and driver list, and review motor vehicle records before you hire someone to drive. Decide who is allowed to take vehicles home and what they may use them for. Employees driving their own cars on company errands raise a separate question about hired and non-owned auto. The post on commercial auto for a plumbing business with multiple vehicles covers how a fleet policy is built.

How does the type of plumbing work drive the cost?

Carriers view residential service, commercial work, new construction, excavation and gas work differently. A company that adds sewer repair or commercial new construction as it grows is changing its exposure, not only its headcount.

General liability reflects the work, including completed operations, the exposure that follows installed work after the job ends. Excavation and confined-space work affect workers comp. Drain and sewer work may call for pollution liability, and design work for professional liability.

Describe your work accurately and break revenue out by type. An application that understates the riskier work produces a quote that may not hold up, and coverage that may not respond when that work causes a claim.

How do the states you work in drive the cost?

Workers comp is regulated and priced state by state, and crossing state lines means each state needs to be addressed on your policy. In the monopolistic states, comp comes only from the state fund. Auto rules also vary by state.

A company with 15 employees is more likely than a smaller one to take work in a neighboring state. Tell your agent before the first job there, not after. The state pages on the locations page describe how each state handles workers comp for plumbing contractors.

Real-World Scenario: A residential service plumbing company grows to a crew of fifteen, adds a third service area across a state line, and takes on its first commercial new-construction contract. At renewal, the owner sends payroll split between field technicians, office staff and the owners, a vehicle list with every driver, revenue broken out by residential and commercial work, and loss runs. The agent flags that the new state is missing from the comp policy and that the commercial contract requires an umbrella. Both are addressed before the renewal binds, and the quote reflects the business as it actually operates.

How does your claims record drive the cost?

At this size you have a record carriers can read. Frequent small claims suggest a pattern; a single large claim raises questions about what changed afterward. For workers comp, many states apply an experience modification based on past claims, which can raise or lower the cost.

Underwriters also look at what you did after a claim. A company that can show a change, a new trench procedure, a vehicle policy for drivers, a check on installed fittings before the crew leaves, gives the underwriter a reason to treat the claim as history rather than a pattern. Those changes count for more when they are written down.

Request your loss runs early and read them before any agent does. Correct errors, close what should be closed, and write a short note on each claim explaining what you changed. The post on how to reduce claims in a plumbing business lists practical steps.

Why can the cost change after the policy is written?

Because several policies a plumbing company carries are priced on estimates and then checked against actual figures. Workers comp is commonly based on estimated payroll at the start of the term, and general liability may be based on payroll or revenue. After the term ends, the carrier audits your records and adjusts the cost up or down.

At this size, the difference between the estimate and the actual can be meaningful. A company that hires mid-year, gives raises, or moves an office employee into the field ends the year with different payroll from what it reported. A company that grows its revenue faster than expected may see the same on liability.

Subcontractors are the other common audit surprise. If you paid subcontractors who cannot show their own coverage, the auditor may treat what you paid them as part of your exposure. Collect certificates before subs start, and keep them with your payroll records.

Tell your agent about significant changes during the year rather than waiting for the audit. An adjusted estimate keeps the final bill closer to what you planned for, and it keeps the policy describing the business you actually run.

When should a growing plumbing company revisit its program?

Revisit it at each turning point, not only at renewal. Growth changes the exposure in steps, and each step is a reason to check that the policies still fit:

  • when headcount rises enough to add a crew or a supervisor;
  • when you take work in a new state;
  • when you add a new type of work, such as excavation, gas or commercial new construction;
  • when a new contract asks for limits or endorsements you do not carry;
  • when vehicles are added or employees start taking them home.

Each of those changes moves at least one cost driver. Catching them as they happen keeps your coverage matched to the business and avoids surprises at audit and renewal.

What can a 15-employee plumbing company actually control?

More than it might seem. You control how payroll is recorded and reported, who drives company vehicles, how jobs are documented, whether subcontractors carry their own coverage, and how complete your submission is.

You also control the structure of the program. Deductibles, the choice between a single carrier and several, and the umbrella layer all affect cost. The post on bundled liability and workers comp discusses when combining lines helps.

For neutral background on how business insurance works, the NAIC keeps a small business insurance guide. When you are ready for a real number, send us your payroll by job class, vehicle and driver lists and loss runs, and we will prepare a quote built on your records rather than a guess. You can also read about the agency first.

The bottom line

Our estimate for a plumbing business with fifteen employees is roughly $10,000 to $25,000 or more for the year. Where a company lands depends mostly on payroll and how it is classified, the vehicles on the road, the kind of work the crew does, the state and the claims record, and only your records turn the estimate into a quote.

Frequently asked questions

How much does insurance cost for a plumbing business with 15 employees?

Our estimate is roughly $10,000 to $25,000 or more for the year. That is a range, not a quote. Where a company lands, or whether it goes above the range, depends on your payroll and how it is classified, how many vehicles and drivers you have, the type of plumbing work you do, the states you work in, the limits you carry and your claims history. An agent needs those records to produce a real quote.

Which policy usually grows the most as a plumbing company hires?

Workers compensation and commercial auto tend to move most directly with headcount, because workers comp is priced largely on payroll and auto on the vehicles and drivers added with each crew. General liability often follows revenue or payroll too. Which one dominates for your company depends on your mix of field staff, vehicles and work.

Does it matter how my 15 employees are classified?

Yes. Field plumbers, office staff, sales staff and owners are generally treated differently, especially for workers compensation. If office payroll is lumped in with field payroll, the whole amount may be treated as the riskier work. Keep payroll broken out by what each person actually does, and ask your agent how each group is classified.

How does claims history affect the cost at this size?

A company with employees and a few years of history has a record that carriers can read. Frequent claims or a large one can raise the cost and narrow the carriers willing to quote, while a clean record and a documented safety program help. For workers comp, many states apply an experience modification based on past claims.

Do the states I work in change what I pay?

Yes. Workers comp rules and rates are set state by state, auto rules differ, and some states run monopolistic workers comp funds. A company working across state lines needs each state listed correctly on its policies. The state your crews work in matters as much as where your office sits.

What records should I bring to get an accurate quote?

Bring payroll broken out by job class, a list of vehicles and drivers, an equipment list, revenue by type of work, your loss runs from current and prior carriers, subcontractor certificates and the insurance sections of your main contracts. A complete submission produces a quote you can rely on and compare.

About the author

Nate Jones, CPCU

Nate Jones, CPCU, is the founder of Wexford Insurance and Plumbing Guard Insurance, a specialty insurance agency placing plumbing contractor coverage in 48 states across a 25-carrier specialty panel. He prices insurance programs for growing plumbing companies by working through payroll by job class, vehicle and driver lists and loss history, and explains which of those levers the owner can actually move. Connect via the Plumbing Guard Insurance quote form or call 317-942-0549.

Insure your plumbing operation with a CPCU-led agency

Tell us how you work — residential service and remodel, or commercial systems and new construction — and we will market it to carriers that write the plumbing class.