Owner Resources

Plumbing Contractor Insurance Requirements: Who Sets Them

Plumbing contractor insurance requirements come from your state or local licensing authority, your state’s workers comp and auto laws, and the contracts you sign. No single list covers them all, so the job is to find each source, get its requirement in writing, and build coverage that meets the strictest version of each.

This is general education, not legal advice. Requirements are set state by state and sometimes city by city, and they change. Treat everything below as a map of where to look, then confirm with the authority that sets each rule.

Why isn’t there one answer to what insurance a plumber needs?

Because different parties ask for coverage for different reasons. A licensing authority wants assurance that a licensed contractor can answer for harm to the public. The state wants injured workers paid and drivers insured. A general contractor or property owner wants to know that your mistakes will not land on them.

Each sets its own terms, and none of them knows what the others asked. The result is a stack of requirements that overlap without matching. One asks for proof of general liability, another for specific limits, a third for wording that names it on your policy.

The practical answer is a requirements list: one page that records each source, what it requires and where you found it. That page is what you hand an agent, and it turns a confusing question into a checklist.

Licensing authority

May ask for proof of liability or a bond.

Workers comp rules

Set by the state once you have employees.

Auto rules

Set by the state for vehicles on its roads.

Your contracts

Often the strictest: limits, endorsements and wording.

each source flows into
A single requirements list you keep with your policies
The sources of plumbing contractor insurance requirements sit side by side: the licensing authority, the state workers comp rules, the state auto rules and the contracts you sign. Each flows into the same requirements list. The contracts box is highlighted because contract terms are often the most demanding. No figures are shown.

What can a licensing authority require?

A licensing authority can require proof of insurance, a bond, or both as a condition of issuing or renewing a license, but practice varies widely. Some states license plumbers through a state board, some leave it to cities and counties, and some split the work between them. The post on whether plumbers need a license covers that patchwork.

When a requirement exists, it usually asks for proof of general liability at a stated limit, filed in a stated way. Ask the authority three questions in writing: what coverage it requires, what limit, and what form of proof it accepts. Some want a certificate sent directly from the agency; others want it uploaded with an application.

If you work in more than one state or city, ask each one. A license in one place says nothing about the requirements in the next. The steps for a first application are in the post on where a new plumber gets the insurance to get licensed.

What do state workers comp rules require?

In most states, a business with employees must carry workers compensation, though states set their own thresholds and exceptions. Texas is the outlier, where coverage is generally elective for most private employers. In North Dakota, Ohio, Washington and Wyoming, it comes only from the state fund.

Your state workers compensation agency is the authority on who must be covered, including how owners, officers and subcontractors are treated. The Department of Labor keeps a directory of state workers’ compensation officials with contacts for each state. The post on where to get workers comp for plumbing employees explains how the regimes affect where you buy.

Subcontractors deserve their own line on your list. Ask your state agency how it treats the subcontractors you hire, and collect and track their certificates regardless of the answer.

What do state auto rules require?

Each state sets its own rules for insuring vehicles on its roads, and a van or truck used for plumbing work generally belongs on a commercial auto policy rather than a personal one. Triple-I explains why business use changes the policy in its article on whether you need a commercial auto policy.

The state rule is a floor, not a recommendation. Contracts commonly ask for auto limits above it, and an umbrella may require higher underlying limits. Record the state rule and the contract rule on separate lines so you can see which one governs. Your state insurance department can confirm the state rule.

What do contracts require, and why are they the strictest?

Contracts ask for what protects the other party, so they tend to ask for more. A subcontract with a general contractor, or an agreement with a property manager, commonly sets limits for general liability, auto, workers comp and umbrella, then adds terms about how your policy must treat them.

Expect to see requests like these:

  • additional insured status for the general contractor or owner, on ongoing and completed operations;
  • primary and noncontributory wording;
  • a waiver of subrogation;
  • notice before cancellation;
  • certificates before work begins.

The post on what general contractors require from plumbing subs walks through a typical insurance exhibit. Read each contract’s insurance section before you sign, not after. The post on how to read a plumbing insurance policy shows where each of those terms lives in your forms.

Real-World Scenario: A plumbing contractor licensed at the state level wins a city job that requires its own license registration and a commercial project for a general contractor in the same month. The owner builds one requirements list: the city wants a certificate filed with the registration, the state comp rules apply because the company has employees, and the subcontract asks for additional insured status on completed operations and an umbrella. Comparing the list with the policies shows the umbrella is missing and the endorsement covers ongoing work only. Both are fixed before the first day on site.

Where do bonds fit into the requirements?

A bond sits beside your insurance requirements, not inside them. Some licensing authorities and some customers ask for a license or permit bond, and some public and commercial projects ask for performance and payment bonds. A bond is a different instrument from an insurance policy.

Insurance protects you against covered losses. A bond protects the party that required it, such as the licensing authority, the public or a project owner, by guaranteeing that you will meet an obligation. If the surety pays a claim on the bond, you are generally expected to pay the surety back. That is why a bond is underwritten on your company’s finances and history, not only on the work.

Put bonds on your requirements list as their own row. Record who requires the bond, what kind it is, the amount stated in the requirement and when it must be renewed. Ask your agent whether the agency handles surety or works with a surety partner, since the paperwork runs through a different process from your policies.

What should you do when requirements conflict?

Meet the strictest version of each requirement. If a licensing authority asks for one general liability limit and a contract asks for a higher one, the contract governs for that job. If two contracts ask for different endorsements, your policy needs both.

Some gaps are easier to close than others. A higher limit is often reached through an umbrella above your primary policies rather than by raising each primary limit. Endorsements such as additional insured status or a waiver of subrogation can often be added, sometimes for a single contract and sometimes on a blanket basis that covers any contract requiring them. Ask your agent which approach your carrier offers.

When a requirement cannot be met, say so before you sign. General contractors and owners sometimes accept an alternative, a different limit or wording, if you ask early. Signing a contract you cannot satisfy leaves you in breach the day work starts, and it can leave the other party without the protection they were promised.

How do you build your own requirements list?

Build it in four rows, one for each source, and give each row three columns: what is required, the limit or wording, and where you confirmed it. Fill it from documents, not memory: the licensing authority’s written instructions, the state agency’s guidance and the contract itself.

Then compare the list with your declarations pages. Mark every line where your coverage falls short. For each shortfall, ask your agent whether the policy can be adjusted, whether a different policy is needed, or whether the contract term can be negotiated.

Update the list whenever something changes: a new state, a new city, a new customer, a new vehicle, a new employee. A list that is current is the fastest way to answer a certificate request or a license renewal.

If you want help building yours, send us the contracts and licensing instructions you have, and we will match them against your program. You can request a quote, check the state pages for your state, or read about the agency.

The bottom line

Plumbing contractor insurance requirements come from four places: your licensing authority, your state’s workers comp and auto rules, and the contracts you sign. Find each one in writing, list them together, and build your coverage to meet the strictest version of each.

Frequently asked questions

Is there one national list of plumbing contractor insurance requirements?

No. Requirements are set state by state, sometimes city by city, and then again in each contract you sign. A licensing authority may ask for proof of general liability, the state sets workers comp and auto rules, and a general contractor adds its own limits and endorsements. You assemble the list from each of those sources.

Do plumbers need general liability insurance to get licensed?

It depends on where you work. Some licensing authorities ask for proof of general liability or a bond before issuing or renewing a license, and others do not. Ask the licensing authority in each state and city where you work, in writing, and ask what form of proof it accepts. The answer can change, so check again at renewal.

When does a plumbing business have to carry workers comp?

Most states require workers compensation once a business has employees, though the details vary by state and Texas treats it as generally elective for most private employers. Your state workers compensation agency is the authority. In the monopolistic states, North Dakota, Ohio, Washington and Wyoming, the coverage comes only from the state fund.

Are a general contractor’s insurance requirements legally binding?

They bind you once you sign the contract that contains them. A subcontract can require limits, additional insured status, a waiver of subrogation and other terms beyond anything the law demands. Read the insurance section before you sign, compare it with your policies, and negotiate or adjust coverage first, because a gap discovered after a loss is costly.

Do commercial auto requirements apply to a plumbing van?

Each state sets its own rules for insuring vehicles on its roads, and a van used for business generally belongs on a commercial auto policy. Contracts often ask for auto limits above what the state requires. Confirm the state rule with your state insurance department and the contract requirement with the contract itself.

How often should I recheck my insurance requirements?

Recheck at every license renewal, every policy renewal and every new contract. Licensing rules change, contracts differ from customer to customer, and your business changes as you add crew, vehicles and types of work. A one-page requirements list kept with your policies makes each recheck quick.

About the author

Nate Jones, CPCU

Nate Jones, CPCU, is the founder of Wexford Insurance and Plumbing Guard Insurance, a specialty insurance agency placing plumbing contractor coverage in 48 states across a 25-carrier specialty panel. He helps plumbing contractors match their coverage to the requirements set by licensing authorities, state law and general contractor agreements before a bid or a license application goes in. Connect via the Plumbing Guard Insurance quote form or call 317-942-0549.

Insure your plumbing operation with a CPCU-led agency

Tell us how you work — residential service and remodel, or commercial systems and new construction — and we will market it to carriers that write the plumbing class.