Owner Resources

Where Can a New Plumber Get the Insurance Needed to Get Licensed?

A new plumber can get it through an independent commercial insurance agency that places general liability, adds workers compensation once there are employees, and issues the certificate of insurance the licensing board asks to see. The agency does the placing; you do the groundwork first, starting with what your license actually requires.

This is general education, not legal advice, and licensing requirements vary by state and change over time. Nothing below tells you what your state demands; it tells you how to find out and how to avoid the delays that catch new applicants most often.

Who places the insurance for someone without a plumbing company yet?

An independent commercial insurance agency is the usual answer, because it works with more than one carrier and can build a contractor’s program instead of selling one fixed product. For a new plumber the core is general liability, which responds to the harm your work causes other people and their property, including after the job is finished. Our general liability coverage page frames that line, and the coverage overview shows the rest of the menu.

Where the agency sits matters less than whether it handles trade contractors. A home-and-auto office may not be able to place plumbing at all. When you call, say in the first minute that you are a plumber working toward a license and ask whether the agency places plumbing contractors regularly. If the answer is vague, move on. You are looking for someone who has done this exact paperwork before and can tell you what boards and customers tend to ask for.

What should I confirm with my licensing board before calling an agent?

Confirm the board’s requirement first, in writing if you can, because the board decides what counts as acceptable proof and the agent can only work from what you pass along. This site does not state any state’s insurance requirement for a plumbing license. Whether a state asks for liability coverage, workers compensation, a bond or nothing at all, and at what limits, is for your state licensing board to answer. Where plumbing is licensed locally, the answer belongs to the city or county office.

Questions worth asking, in plain words:

  • Does the license require proof of insurance at all, and if so, which coverages?
  • What limits does it call for?
  • Is proof due with the application, or only before the license is issued?
  • Who must be named on the certificate, and in what form is it accepted?
  • What happens to the license if the policy later renews, lapses or cancels?

Write the answers down and bring them to the agent. Licensing is not uniform, and our guide to how plumbing licensing differs by state sets out the three postures: a dedicated plumbing board, plumbing inside a contractor classification, and licensing left to cities and counties. The locations pages carry the per-state detail and point to the governing authority, which remains the source of truth.

What is a certificate of insurance, and who does it name?

A certificate of insurance is a short document your agent issues that summarizes your coverage: the insurer, the policies in force, the policy period and the limits. It is evidence that coverage exists, not the policy contract itself, and it does not change what the policy covers.

It names two kinds of parties. You are the insured. The party asking for proof is the certificate holder, which in a licensing setting is typically the board or the office issuing the license, though your board will say whether it wants a particular name and address. Being listed as holder gives that party no rights under your policy.

That differs from additional insured status, where a customer or contractor is added to your liability policy by endorsement; our post on additional insured status explains it, and what general contractors require from plumbing subs covers the later demands. For a license, give your agent the holder’s exact legal name and mailing address as the board states them, because the wrong holder is an easy reason for a rejected application.

How far ahead of the exam or application should coverage start?

Start talking to an agent early, but let the board’s answer set the date coverage actually begins. Buy too early and you pay for a policy that sits idle while you wait on exam dates and processing. Buy too late and the license stalls because the certificate is not ready when the board wants it.

An agent can usually discuss, and often quote, a policy before your license exists. What changes by board is when proof is demanded: with the application, after you pass, or just before the license is released. Ask that question directly, then work backward. If proof is needed with the application, you want the certificate in hand before you submit. If it is only needed at issuance, you can time the start date to your expected approval.

Give the agent the date you expect to need the certificate, not only the date you hope to start work. A policy start date is also not permission to begin work; whether you may take paying jobs before the license is final is a licensing question for your board.

What does an agent need to know about a business that does not exist yet?

An agent needs a clear picture of what the business will do, and a new company can supply that without any operating history. Come with:

  • The legal name you will operate under, and the entity type if you have formed one. Our post on how to start a plumbing business covers the steps that come before the insurance call.
  • The kind of work: residential service, remodel and new construction, commercial, or a mix.
  • Whether you will work alone, hire employees or use subcontractors, and when.
  • Your background in the trade and the license tier you are pursuing.
  • Whether you will drive a work van or truck for the business.
  • The state or states where you plan to work, and what the board or your first customers want on the certificate.

A new company has no loss history of its own, so the carrier leans on the owner’s experience and the plan for the work. Do not describe the business as smaller or simpler than it will be to make the application easier; coverage written on an inaccurate description can cause trouble at the worst moment.

Real-World Scenario: Picture a plumbing company that exists only as a plan: a journeyman preparing for a master exam, working alone for now and expecting to hire a helper after the first few months. Before calling anyone, the owner emails the licensing board and gets back, in writing, which proof the license needs and whether it is due with the application or at issuance. The owner then calls an independent agency that places plumbing contractors, explains the work and the hiring plan, and asks for a certificate naming the board exactly as the board wrote it. Coverage starts when the board’s timing says it should, and workers compensation is added the week the helper’s start date is set.

Your license plan
Trade, tier, state, hiring plan
Confirm the requirement with your board
Coverage, limits, proof, timing, holder name
Independent agent
Receives the board’s answers in writing
Coverage placed
General liability, then workers compensation with employees
Certificate of insurance
Board named as holder
Licensing board
Accepts the proof
The order runs from your license plan, to confirming the requirement with the board, to the agent, to coverage, to the certificate, and finally to the licensing board. The highlighted step comes before any call to an agent because everything after it depends on the board’s answer. No figures are shown.

Do I need workers compensation, and when does it come in?

Workers compensation covers injuries to your own crew, and the need generally begins when you have employees, so the date you hire your first helper is the date to plan around. Whether your state or your licensing board expects proof of it, or an exemption form, from a sole owner is a question for the board and for your state’s workers compensation authority. Do not guess. Our workers compensation page explains how the line works for plumbing crews.

Tell your agent your hiring plan even if it is loose, so the coverage can be added the day the first person starts. Mention subcontractors too, since how a state treats someone you pay as a sub can differ from how it treats an employee.

One structural point is worth knowing now. North Dakota, Ohio, Washington and Wyoming do not let private carriers write workers compensation; it is available only through a state agency fund. In those states the liability side is placed privately but comp runs through the state. The North Dakota Workforce Safety & Insurance site and the Washington State Labor & Industries site are examples of the state-run sources. The state still decides what its licensing board asks for, so ask both.

What if my state leaves plumbing licenses to the city or county?

Then the person to ask is the city or county office that issues the license or permit where you will work, and the answer can differ from one jurisdiction to the next. Some states have no statewide plumbing license, so no single board’s rule applies everywhere, and crossing a county line may mean meeting a different set of expectations.

Where the license is local, the certificate and the written contract tend to carry more weight with customers and general contractors, because no state credential is doing that work. Ask each office what it wants shown and in what form, and keep a clean file of the answers. For general background on how small business insurance fits together, the NAIC small business page is a neutral starting point, and your state insurance department is the place to ask how insurance is regulated where you live.

When you have the board’s answers and a clear description of the work, request a plumbing contractor quote so an agent can build the program around what your license actually requires. A work vehicle later adds commercial auto.

The bottom line

Go to an independent commercial insurance agency with your license plan in hand: it can place general liability, add workers compensation once you have employees, and issue the certificate of insurance. First ask your licensing board exactly which coverage and proof the license needs, because that varies by state.

Frequently asked questions

Which kind of agent should a brand-new plumber call for licensing insurance?

Call an independent commercial insurance agency, ideally one that places plumbing and other trade contractors regularly. An independent agency can shop more than one carrier, so it is not limited to a single company’s appetite, and it can issue the certificate of insurance the board wants. A personal-lines or home-and-auto office usually cannot place contractor liability, so ask early whether the agent handles trade contractors.

Do I need workers compensation just to get my plumbing license?

That depends on your state and on whether you have employees, so do not assume either way. Many new plumbers start alone and add a helper later, which is when workers compensation usually enters the picture. Ask your licensing board whether it wants proof of workers compensation or an exemption statement with the application, and tell your agent what the board said before you request any certificate.

What is a certificate of insurance and what does it prove?

A certificate of insurance is a one-page summary issued by your agent showing who insures you, which coverages are in force, the policy periods and the limits. It is evidence that a policy exists, not the policy itself. A licensing board, a city or a customer can be listed as the certificate holder, so the document is addressed to whoever asked for proof.

Can I buy the policy before I pass the exam?

Often the agent can quote and arrange coverage before the license exists, but you should confirm the sequence with your board first. Some boards want proof with the application, others only before the license is issued, and a few leave it to local offices. Buying too early can mean paying for coverage that sits idle, while buying too late can stall the license, so ask the board which it expects.

What will an insurance agent ask a new plumbing business?

Expect questions about the kind of plumbing you will do, such as residential service, remodel or commercial work, whether you will have employees or subcontractors, whether you will use a work vehicle, and your own experience in the trade. The agent also needs the legal name of the business, the state where you will work, and what the licensing board or your first customers require on the certificate.

What if my state licenses plumbers only through cities or counties?

Then the proof requirement is set locally, and it may differ from one jurisdiction to the next. Some states have no statewide plumbing license, so ask the specific city or county office where you will work what it wants to see. Give that answer to your agent word for word. Our licensing guide and the state pages on this site explain how the three licensing postures differ.

About the author

Nate Jones, CPCU

Nate Jones, CPCU, is the founder of Wexford Insurance and Plumbing Guard Insurance, a specialty insurance agency placing plumbing contractor coverage in 48 states across a 25-carrier specialty panel. He places general liability and workers compensation for plumbing contractors, and he sees how often a new license applicant loses time because the certificate of insurance was requested before anyone confirmed what the licensing board wanted it to say. Connect via the Plumbing Guard Insurance quote form or call 317-942-0549.

Insure your plumbing operation with a CPCU-led agency

Tell us how you work — residential service and remodel, or commercial systems and new construction — and we will market it to carriers that write the plumbing class.